Maxxis Minion DHR 2 Tyre

The Minion DHR2 is a complete redesign, with acceleration, cornering and braking all improved.

The shoulder knobs were borrowed from the legendary Minion DHF and then beefed up to handle duty as a rear tyre. They are also packed a bit closer together than on the Minion DHF. This helps to disperse the load whilst braking over more knobs, and improve longevity. The centre tread has been heavily ramped and siped to roll fast and track straight under braking. The big, paddle-shaped centre knobs also last remarkably well under hard braking.

Whilst the Minion DHR2 was designed as a rear specific tyre, it works very well on the front too, particularly on harder terrain.

For a great trail tyre combo, run a Minion DHR 2 on the front, with an Ardent or a 2.35" version of the Ikon on the back.

For a more heavy duty enduro set up, your can run Minion DHR 2's front and rear. If you want to just run the DHR 2 on the front then you can team it up with either an Aggressor, Dissector or Minion Semi Slick on the back. If you want to run the DHR 2 on the back, then look to pair it up with either a Maxxis Highroller 2 or a Minion DHF up front.

Please note:

• Skinwall/Dark Tan Wall tyres: Maxxis has made a running change to replace all Skinwall tyres with the Dark Tan sidewalls. During the transition phase, there is a chance that stock from our suppliers may contain a mixture of both sidewall types so you may receive a shade that is different from what you expect. If this does happen please get in touch and we'll do our best to get you sorted with the option you'd prefer ASAP!
• 'WT' stands for Wide Trail. These tyres were designed around use with 35mm internal rims. However, riders utilising narrower rims (ourselves included) have still found them to perform exceptionally. If your rims are narrower than 24mm internal, you may find them to roll and squirm under hard cornering. Minion DHR 2.8" and 3.0" tyres don't have the WT designation as they are designed to run on 35mm internal rims at a minimum.
• Wire bead tyres are sent rolled up to minimise shipping costs. The wires in the beads shouldn't get bent during this process, however, if they arrive with a bend, just bend them back til they are straight. It won't affect the performance of the tyre at all.

Confused about compounds and casings? Not sure what you need? Check out our Ultimate Guide to Maxxis Tyres!

Tyre Weights: